The pilot
The wiseDo Pilot — fixed scope, fixed price, measurable in six weeks.
Start with one line. In six weeks you get true cycle times per station, an SOP-adherence rate and a top-3 bottleneck report — measured on your floor, on the cameras you already have.
The offer
One line. Six weeks. Measured cycle times, SOP adherence rate, and three ranked bottlenecks — ready for your MD review.
A fixed-scope, fixed-fee engagement with a defined deliverable: three measured KPIs from your production floor at the end of six weeks. The subscription price is agreed before the pilot begins.
- Scope
- One assembly line
- Cameras
- 4–6 cameras
- Duration
- 6-week engagement
- Fee
- Fixed ₹3–5 lakh
- Subscription
- Agreed upfront; activates only if all three KPIs are delivered
True cycle time per station
Measured cycle by cycle from the floor.
SOP-adherence rate
Cycle-by-cycle verification against your golden sequence.
Top-3 bottleneck report
Ranked by cycle-time impact: the three stations where fixing throughput yields the highest line-output gain.
Typical Outcomes by Industry
What the pilot reveals for each sector.
Automotive
- ✓ OEE baseline + variance by shift/line
- ✓ 6-10 point OEE recovery target (Q1)
- ✓ Station-level cycle times (measured vs. planned)
- ✓ Downtime root-cause Pareto
- ✓ IATF batch record feasibility
Pharma
- ✓ GMP-aligned batch traveler template
- ✓ Audit-prep time reduction estimate (80-90%)
- ✓ Gowning compliance baseline
- ✓ Deviation capture (per 1000 units)
- ✓ Revalidation scope assessment
FMCG
- ✓ Micro-stoppage frequency (5-30 sec events)
- ✓ SMED timing by changeover type
- ✓ Energy cost per unit (baseline)
- ✓ 10-18% energy reduction estimate
- ✓ Scrap root-cause tagging sample
Electronics
- ✓ Setup error frequency by variant
- ✓ AI inspection defect classification sample
- ✓ Quality rate baseline (target: 99.7%+)
- ✓ Recipe error-proofing feasibility
- ✓ Rework cost baseline
Timeline
Six weeks, start to results.
- 1Week 0
Floor walk
We walk your line, agree the scope and confirm camera mounting points.
- 2Week 1–2
Install & calibrate
Cameras and edge box go in; we calibrate against your normal production.
- 3Week 3–5
Measure
wiseDo measures every cycle — true cycle time, SOP adherence, bottlenecks.
- 4Week 6
Results review
We present the three measured KPIs to your team. If targets are met, the pre-agreed subscription activates. If not, there is no further obligation.
What we need from you
Your checklist before we start.
These are the only four things we need to begin. Nothing more is required before Week 0.
- Camera mounting points on the chosen line
- Network access for the edge box
- One champion on the floor
- Your SOP documents for the line
Start here
Book your free floor walk.
Tell us about your plant and we’ll confirm availability for a floor walk within one business day.
Pilot fee is a fixed ₹3–5 lakh — agreed before any work begins.